Herschel Advantage IR 1300 / 1950
RRP: From: £330.00
The Advantage IR range of infrared heaters from Herschel offer a great heating solution for commercial and workshop use. Ideal for keeping your workspace and tools warm and dry during the winter.
Heated areas are based on an average installation. Please note that many factors may influence this and we advise that you get in touch for more accurate sizing requirements.
Control Options (Required)
Herschel iQ MD1 Wired Thermostat
Herschel Advantage IR Indoor Infrared Space Heater
The Herschel advantage range looks like a traditional electric heater at first glance, but it is actually a quality infrared heater, suitable for indoor workshops and workspace zone heating. The Advantage IR comes in two powers, 1300 watts and 1950 watts with 2 or 3 high-emission ceramic heating elements, fitted into a directional, reflective unit. Unlike a convection heater, it is designed to gently heat surfaces rather than the air in between. This makes it ideal for large indoor areas.
The heater develops full output power within 5-8 minutes – and unlike electric convection heaters, the unit will not glow – the only effect you will notice is the gentle warmth. Download the product datasheet for more information.
How to install the Advantage IR Infrared Heater
The heater should be installed around 2.3 to 2.5m from ground level, with the heaters angled down at 60 degrees (it must be installed in accordance with installation instructions). They are much more efficient at warming an open area than a convection heater, because less heat gets lost to the atmosphere before it has warmed you or a surface nearby. Try them in a garage or workshop to make winter work on the car a lot more comfortable.
Advantages of infrared over other commercial heating:
- No exhaust emissions that you would get with a gas heater
- Silent operations with no glow
- Cheap install costs and no maintenance
- Focus the heat where you need it – less wasted heat.
These heaters could be used in warehouses, workshops, industrial or commercial units.
1.3kW model (2 x 650 Watt elements)
1.95kW model (3 x 650 Watt elements)
Specifications of the Advantage IR Infrared Heater
Dimensions: 1300 Watts: 510 x 100 x 170 mm. 1950 Watts: 760 x 100 x 170mm.
Element: 2 or 3 White or Black ceramic longwave infrared emitters.
Body: Available in Stainless Steel with white ceramic emitters & black powder coated finish with black ceramic emitters.
Voltage: 230V, 50 Hz