Herschel IRP4 2600
The IRP4 is a fantastic way to heat a large workshop or warehouse. If you have an area with a high ceiling, needing a powerful heating unit, this is going to be the best option for you. The cost per square meter of heating capacity is fantastic compared to other industrial heating options.
Control Options (Required)
Herschel iQ MD1 Wired Thermostat
When it comes to heating a warehouse or workshop, efficiency gains mean big money savings. That is where an industrial infrared heater like the IRP4 comes in. This beast of a heater is 2,600 watts and will heat an area of around 12-21 square meters.
The Advantage IRP4 industrial heater has 4 high-emission ceramic elements, mounted in a unit with high reflectivity to direct the heat towards the area you need it. At its optimum height, it will gently warm those below directly without heating the air in between. The unit will not glow while in use, and will reach an optimum operating temperature within just 10 minutes.
The Herschel IRP4 must be located in a position to allow for proper and efficient use – that means at the recommended height of 2.5-3m (installation instructions must be followed), hung a minimum of 125mm from the ceiling, and at least 1.5m from the nearest wall. The unit is designed to be mounted or suspended from a ceiling. The heating elements are at a fixed downward angle to ensure maximum heat arc from this installation height.
Herschel Advantage IRP4 Infrared Heater – Product Features
- Element: 4 x White glazed ceramic long wave infrared emitters (3-10 microns)
- Body: Stainless Steel body with protective grill.
- Voltage: 230V, 50 Hz
- Guarantee: 5 years. Excludes Ceramic Elements 12 Months.