iQ Control Features Check out the features of our iQ heating controls using our interactive picture below.
Archives: Accordion Items
HERSCHEL XLS CONTROLS – for Select XLS panel only
XLS Control Features Check out the features of our XLS heating controls using our interactive picture below.
WH1 Central Controller
Our WH1 Controller system offers a local centralised control solution. Control all your heaters in the property from one colour touchscreen unit. Heaters are controlled wirelessly without the need for wifi. Choose this option if you want the benefits of centralised control but do not need to control remotely or do not have wifi. Each[…]
R1 + iQ Hub – Slick App only control
Wire all heaters on the same circuit to one or many R1s according to 10 amp limit per R1. Requires a minimum of one R1 per room / zone. Program and control the heaters using the APP only. Note: the R1 will sense the room temperature which will be displayed on the APP. Must be[…]
T1 Wireless Thermostat Pack – versatile solution which minimises cabling / disruption
Use one T1 per room / zone and one R1 per heater. Each R1 requires mains electricity supply. Wirelessly pair each R1 to the T1. The T1 can be located anywhere in the room and is battery operated so does not require mains supply. Can be surface mounted to the wall or placed on a[…]
MD1 Wired Thermostat – best for new builds / renovations and commercial applications
Use one MD1 per room / zone and wire all heaters within the room onto the same circuit. MD1 is wired to the mains electricity supply & requires recessing into the wall. This is the best option for new builds or renovations where cabling runs can be hidden in walls / ceilings. Can become App-enabled[…]