Draught Excluders – Ecosavers
Draught proofing is one of the cheapest and easiest ways to save on your heating costs in your home. In fact, an estimated £60 can be shaved off the average UK home heating bill, just by implementing simple draught proofing procedures using these draught excluders.
Also recommended for this product
Heating systems that rely on convection, such as gas boilers with radiators, rely on heating the air to the required temperature. These systems become highly inefficient when draughts lead to heat loss, as the heating system is required to work harder to maintain the same temperature. An easy solution to this is blocking draughts, which commonly occur around windows and doors.
The ins and outs of the Ecosaver Draught Excluder
These products by Ecosavers are made from EPDM (Ethylene Propylene Diene Monomer) flexible rubber material, meaning that these draught excluders are excellent quality and durable as a result. Coming in two different shapes, the E (1-2mm channel) or the P (2-5mm chnnel) fit, means that every gap can be filled. The easy peel and quick stick properties make these draught excluders the idea DIY solution to those unwanted heat loss areas.
The best, most durable Draught Excluder – EPDM quality
In each pack there are two, three metre lengths of draught excluder. The areas that these draught excluders are designed to target are loft hatches, doors and windows. Areas where, specifically, something can be opened and closed, latch into position. Adding these excluders, provides a compressible seal that blocks and fills any gaps that may cause draughts.
The draught excluders are made from a durable comp foam, which can last for 20 years before wear & tear may take hold.
To find out more about Draught Proofing in and around the home, please visit our draught proofing section found HERE.
To install, simple open the door or window, wipe clean the surface, peel back the cover revealing the adhesive tape and stick in position.
Draught Excluders – Ecosavers – Product Features
- Made from EPDM (Ethylene Propylene Diene Monomer) combining durability with flexibility
- Quick peel and easy stick allowing for DIY
- Durable, slightly compressed foam like material
- Each pack contains 2 sets of 3 metre length draught excluders – 6m in a pack
- Available in an E or P fit
- E – profile is suitable for 1-2mm seams
- P – profile is suitable for 2-5mm seams